Hose Line :: Equipment

COTTON POLYESTER DUCTING U HDDC201 2 IN ID X 25 FT

2010-07-05T10:43:00.000-07:00

COTTON POLYESTER DUCTING

"Type DC is designed for air handling, fume control, dust collection, and light material handling applications. It features a double ply of neoprene coated cotton/polyester blend fabric with a helical wire reinforcement." --pp 90 U Cat 2010. Available in 25 ft increments. Color: black. Operating temperature: -40 to +250 DEG F. Following are current as of 7/1/2010.

EBAY ITEM 110555697732

2010-07-05T10:41:00.000-07:00

eBay Item 110555697732

More at HoseLine.Net

GATES MASTERFLEX 300 EPDM

2010-06-28T10:10:00.000-07:00

GATES INDUSTRIAL PART NUMBERS: GAT 7744-5201, GAT 7744-5202, GAT 7744-5203, GAT 7744-5204, GAT 7744-5205, GAT 7744-5206, GAT 7744-5207, GAT 7744-5208. See the complete Gates Catalog for more products. Call or send us a fax to process your orders.

HANSEN SERIES HK ISO B 45 SERIES QD COUPLERS

2010-06-24T22:55:00.000-07:00

Hansen HK Series quick disconnect couplers are equal to Aeroquip FD45 Series and Gates G94511/G94521. "Series HK Couplings are the most versatile couplings available and are suitable for use with various liquids, chemicals, steam, gases and vacuum. Series HK couplings conform to the dimensional requirements of ISO 7241-1 Series B. Body sizes range from 1/8 [inch] to 1 [inch]." Source: Hansen QD Coupling Catalog, 2010, pp. 46. Updated 10:49 PM 6/24/2010.

JACKHAMMER HOSE ASSEMBLY

2010-06-23T12:33:00.000-07:00

SPECIAL PROMO MAY 1ST TO JUNE 30, 2010
RECEIVE 40% DISCOUNT FOR ORDERS OF 10 UNITS OR MORE OFFER GOOD UNTIL SUPPLIES LAST OR UNTIL DEADLINE, WHICHEVER COMES FIRST. REGULAR PRICE 120.00 USD PART NO U HJKCT070. REF BULLETIN 75.

PROMO SHIRTS

2010-06-10T13:38:00.000-07:00

HYDRAULIC BRAKES & CLUTCH

2010-04-14T22:36:00.001-07:00

LM 1500 SERIES 10 MW GAS POWERED ELECTRIC GENERATOR

2010-03-23T13:28:00.000-07:00

LMA 1500
Product Overview

GAS TURBINE

Model:                       LMA 1500.
Cycle:                        Simple.
Fuel:                          Natural Gas (distillate or #2 diesel options).
Starting System:         Hydraulic start system.
Shaft power:               15,400 hp.
Rotating Parts:            Dry flexible load coupling.

GENERATOR

Type:                      Ideal Electric "SAB" horizontal, brushless, and air cooled.
Cooling System:      Air cooled, open ventilated. Fin fan, air-to-air cooling.
Rate:                      12,500 KVA, 60 hz, 1800 rpm, 13800 volts.
Excitation:               Field suitable, brushless exciter-regulator.
Lubrication:             Lube oil system is integrated with the package.

PERFORMANCE (ISO Conditions)

Power Turbine Speed:       5500 rpm
Exhaust flow:                   162 lbs/s
Power turbine temp:          800° Fahrenheit (101 MMBTU/HR. Exhaust @ 600° Fahrenheit drop)
Generator output:             10,000 KW - (11,500 PEAK)
Generator Efficiency:         0.973

GAS TURBINE SPECS

Table Of Contents

1.00 Equipment List

1.01 Standard Equipment

1.02 Optional Equipment

1.10 Installation Requirements

1.20 Purchaser's Responsibilities

1.30 Acceptance Test

1.40 Performance Rating Specifications

~~~~~~~~~~~~~~~~~~~~

1.00 EQUIPMENT LIST

1.01 Standard Equipment

•Bell mouth.

•Bullet nose.
•Gas generator with fuel nozzles and manifold(s) for natural gas, liquid fuel, or dual fuel (as stipulated for each engine model).
•Gas detection System.
•Power turbine.
•Lubrication system components.
•Engine driven lube and scavenge pump.
•Lube supply manifold.
•Instrumentation:

(2) gas generator speed sensors; magnetic pickup type.
(2) power turbine speed sensors; magnetic pickup type.
(11) power turbine inlet temperature probes; chromel/alumel type.
(1) gas generator vibration sensor; accelerometer type.
(1) power turbine vibration sensor; accelerometer type.
(1) oil supply temperature sensor; RTD single element type.
(5) oil scavenger temperature sensors; RTD single element type.
(1) lube oil supply pressure tap.
(1) scavenger oil pressure tap.
(2) pressure tap for compressor discharge pressure.
(1) pressure tap for fuel manifold pressure.
(1) power turbine inlet pressure tap.

•Single ignition system: igniter, high tension cable and exciter.

1.0.2 Optional Equipment

•Fuel pump with filter (engine mounted) for liquid fueled gas turbine only.

•Fuel pump with filter (off engine mounted) for dual fuel application.
•Air or natural gas start system.
•Inlet seal kit.
•Compressor inlet pressure (Pt₂) probe.
•Dual redundant lube temperature sensor kit.
•Additional accelerometers kit.
•Electronic chip detector kit.
•Inlet cooling system.
•SCR system.
•Fuel/gas compressor.
•Oil debris monitoring system.
•Individual EGT thermocouple readout system.
•Remote control and monitoring system.
•Ultraviolet flame detector kit.
•Dual ignition System Kit.
•Spare parts package.
•Compressor water wash system.
•Air filtration system.
•Intake Extinguishing System
•Skid and control enclosures
•Shipping Container.

1.10 INSTALLATION REQUIREMENTS

Reliable operation and low maintenance costs for the gas turbine require that the purchaser installation designs and operating/maintenance practices be in accordance with the instructions defined in the then-current Installation Design Manual and the Operation and Maintenance Manual.

1.20 PURCHASER'S RESPONSIBILITIES

It is to be recognized that the purchaser has system responsibility for technical integration of the LMA 1500 gas turbine into a complete gas turbine system, satisfying the installation/interface requirements and recommended operation/maintenance practices defined in the then-current Installation Design Manual and Operation and Maintenance Manual. The purchaser's attention is specifically referred to, but not limited to, such system interfacing consideration s as vibration, controls, fuel quality, inlet air quality, inlet system design and construction, and gas turbine cooling.

1.30 ACCEPTANCE TEST

Each gas turbine is tested at LM Alternatives test facility to verify proper mechanical operation and compliance with guarantee performance levels. Testing is in accordance with LM Alternatives established practice for industrial gas turbines. Measurements at five test data points, spanning the entire power range, are taken to establish shaft horsepower and heat rate. Test data is corrected to the guarantee conditions. Upon completion of the test, a formal Test Acceptance Report, including copies of all original test log and data sheets, is issued by Engineering.

1.40 PERFORMANCE RATING

Industrial Gas Generator Performance Characteristics

(59 ° Fahrenheit, sea level, no losses, fuel LHV 18,400 btu/lb)

Power turbine rate:                  5,500 rpm.
Fuel:                                     Natural Gas (#2 Diesel Option)
Insentropic gas horsepower:     17,300 hp.
Exhaust gas temperature:         975° Fahrenheit (800° Fahrenheit @ power turbine)
Exhaust gas pressure:              36 psi
Heat rate:                             7800 btu/ghp-hr
Airflow:                                 158 lb/sec.
SFC (nominal):                       0.51 lb/hp-hr
Nitrous Oxide emission:            75 ppm
Carbon Monoxide emission:       75 ppm

Emission levels for power levels between 75% and 100% of base load.

Sample Diagram

Updated January 2000.

EBAY ITEM 110507224901

2010-03-14T21:36:00.000-07:00

eBay Item 110507224901 was sold.

More at HoseLine.Net

AUTOCLAV OVEN VACUUM HOSE ASSEMBLY

2010-02-02T13:28:00.000-08:00

STAINLESS STEEL VH23 AUTOCLAV OVEN VACUUM HOSE 3/8 IN ID 1K DEG F MAX 200 PSI EXT 4MP 4FPX 71.00 IN OAL. REFERENCE: P/N 20091118-01.

GATES 27453 GAS PUMP HOSE

2010-01-22T12:30:00.001-08:00

GATES 27453 SOFTWALL GAS PUMP HOSE 3/4 IN ID 12MP 12MP 14 FT OAL. UPDATED JAN 2010. PRICE 170.00 USD

KANAFLEX 130 B

2009-12-26T20:49:00.001-08:00

LA 130B-32

KANAFLEX 130 B BLACK 2.00 IN ID
PVC BLACK SUCTION & DISCHARGE HOSE
PVC HELIX LIGHT OILS AND ANIMAL FATS
72 PSI WP -13 TO +140 DEG F
MIN ORDER 100 FT
UPDATED 12/2007

SEVEN EASY STEPS FOR SELECTING THE PROPER HOSE

2009-08-26T15:05:00.001-07:00

Seven Easy Steps For Selecting The Proper Hose

An effective way to remember hose selection criteria is to remember the word...

S TA M P E D
S = Size
T = Temperature
A = Application
M = Material to be conveyed
P = Pressure
E = Ends or couplings
D = Delivery (volume and velocity)

1. Hose Size (Dash Numbers)

The inside diameter of the hose must be adequate to keep pressure loss to a minimum and avoid damage to the hose due to heat generation or excessive turbulence. See hose sizing Nomographic chart on page C63.

To determine the replacement hose size, read the layline printing on the side of the original hose. If the original hose layline is painted over or worn off, the original hose must be cut and the inside diameter measured for size.

NOTE: Before cutting an original hose assembly, measure the overall assembly length and fitting orientation.These measurements will be required to build the replacement assembly.

The hydraulics industry has adopted a measuring system called Dash Numbers to indicate hose and coupling size. The number which precedes the hose or coupling description is the dash size (see following table). This industry standard number denotes hose I.D. in sixteenths of an inch. (The exception to this is the SAE100R5 hoses C5C, C5D, C5E, C5M as well as, C14 and AC134a, where dash sizes denote hose I.D. equal to equivalent tube O.D.) See chart to right.

Hose O.D. can be a critical factor when hose routing clamps are used or hoses are routed through bulkheads. Check individual hose specification tables for O.D.'s.

2. Temperature

When selecting a replacement assembly, two areas of temperature must be considered. These are fluid temperature and ambient temperature. The hose selected must be capable of withstanding the minimum and maximum temperature seen by the system. Care must be taken when routing near hot manifolds and in extreme cases a heat shield may be advisable.

See the Gates Hydraulic Hose Selection Guide on pages C4 and C5, Hose Specification Pages, and/or the Additional Temperature Limits for Gates Hydraulic Hose Chart on page C8 or temperature ranges and limits for water, water/oil emulsions and water/glycol solutions.

3. Application

Determine where or how the replacement hose or assembly is to be used. Most often only a duplicate of the original hose will have to be made. To fulfill the requirements of the application, additional questions may need to be answered, such as:

# Where will hose be used?
# Fluid and/or Ambient Temperature?
# Hose Construction?
# Equipment Type?
# Fluid Compatibility?
# Thread End Connection Type?
# Working and Surge Pressures?
# Environmental Conditions?
# Permanent or Field Attachable Couplings?
# Suction Application?
# Routing Requirements?
# Thread Type?
# Government and Industry Standards Being Met?
# Unusual Mechanical Loads?
# Minimum Bend Radius?
# Non-Conductive Hose Required?
# Excessive Abrasion?

4. Material to be Conveyed

Some applications require specialized oils or chemicals to be conveyed through the system. Hose selection must assure compatibility of the hose tube, cover, couplings and O-rings with the fluid used. Additional caution must be exercised in hose selection for gaseous applications such as refrigerants and LPG.

NOTE: All block type couplings contain nitrile O-rings which must be compatible with the fluids being used.

5. Pressure

Most important in the hose selection process is knowing system pressure, including pressure spikes. Published working pressures must be equal to or greater than the system pressure. Pressure spikes greater than the published working pressure will shorten hose life and must be taken into consideration. Gates DOES NOT recommend using hoses on applications having pressure spikes greater than published working pressures of the hose.

6. Ends of Couplings.

Identify end connections using Gates coupling templates and measuring tools on pages C25 or Coupling Identification section pages C27-C40. Once thread ends have been identified, consult the appropriate section of the catalog for specific part number selection.

7. Delivery (Volume and Velocity)

If the same I.D. of the original hose is used, assume the system is properly sized to efficiently transport fluid. If the system is new or altered, determine the hose I.D. needed to transport required fluid volume flow by using the Nomographic Chart on page C63.

---------------------------------------------------------

Source: Pages C1 to C2, Gates Hydraulics Hose Couplings & Equipment Catalog, 2004 Edition. Hose Line is an authorized/associate distributor of Gates Hydraulics.

REV 1:20 PM 5/27/2009

INGERSOLL-RAND AG210-TK2

2009-08-08T22:26:00.000-07:00

INGERSOLL-RAND AG210-TK2 AIR GRINDER TUNE UP KIT FOR MODELS AG210, DG210 AND EG210. BRAND NEW, OLD STOCK. FOR SALE "AS IS." REF PQ 15098.

PN: JF AG210-TK2
PRICE: 30.00 USD (C. 2008)

CASTER WHEELS

2009-08-03T11:57:00.001-07:00

PART NUMBER: ASY-PN-0018. DESCRIPTION: CASTER WHEEL 04. GEN PURPOSE. FRICTION RING STEM. BRAKE LEVER. 1.50 LBS EA. 5 IN WHEEL DIA. 1/2 IN STEM DIA.

PRICE: 4.00 EA

MS28775-019

2009-07-30T15:21:00.001-07:00

P/N MS28775-019 DESCRIPTION: 2-019. COMPOUND: 4067-70. CURE DATE: 2Q92.
BATCH: 74782. MIL-P-25732C. DUROMETER 70. 1 EA PACKING PREFORMED. MFG:
PARCO. ASI MARINE & INDUSTRIAL, SAN DIEGO, CALIFORNIA. 07/22/92. MIXED WITH:
MFG: NATIONAL SEAL. COMPOUND D25. CURE DATE: 4Q90. FOR SALE, "AS IS." PRODUCT
APPLICATION UNKNOWN.

PRICE 10.00 USD

RUBBER MOUNT 206PL-20

2009-07-30T14:44:00.001-07:00

DESCRIPTION: 206PL-20. F/S/N: 5340-216-6729. MOUNT, RUBBER. CURED: 12/59. CONTRACT NO.: AF 01 (601)27405. LORD MFG CO ERIE, PA. MFGR/CONTR.. REINSPECT AFTER JAN 1964. A-111-1/60. 5 EA IN A BOX BRAND NEW, OLD STOCK. FOR SALE, "AS IS."

ASY-PN-0025-04

2009-07-30T14:09:00.001-07:00

P/N: ASY-PN-0025-04. DESCRIPTION: PRATT & WHITTNEY AIRCRAFT BRAND. 5340-297-2449. CAP. 1 EA. N00383-71-A-7005 OTAIR. A-2/72. MFR P/N 127381. PACKAGE: 6.25 IN X 6.25 IN X 2.75 IN. WEIGHT: 1 LBS. FOR SALE, "AS IS." NO RETURNS, NO EXCHANGE. PRICE: 60.00 USD.

APRIL 2005 SCHEDULE

2005-04-12T00:00:00.000-07:00

12 April 2005

April Schedule. We will be closed between 12 April 2005 to 23 April 2005.

VOLUME DISCOUNTS

2004-12-22T00:00:00.000-08:00

PART NO	DESCRIPTION	50%	40%	30%	MSRP
		9+	6+	3+	1+
U HSW-021	RUBBER AIR HOSE 1/4 IN X 25 FT	~~$12.350~~	~~$14.820~~	~~$17.290~~	~~$24.700~~
U HSW-022	RUBBER AIR HOSE 1/4 IN X 50 FT	~~$23.015~~	~~$27.618~~	~~$32.221~~	~~$46.030~~
U HSW-041	RUBBER AIR HOSE 3/8 IN X 25 FT	~~$16.770~~	~~$20.124~~	~~$23.478~~	~~$33.540~~
U HSW-042	RUBBER AIR HOSE 3/8 IN X 50 FT	~~$31.685~~	~~$38.022~~	~~$44.359~~	~~$63.370~~
U HSW-044	RUBBER AIR HOSE 3/8 IN X 100 FT	~~$61.520~~	~~$73.824~~	~~$86.128~~	~~$123.040~~

U HATH-021	PVC AIR HOSE 1/4 IN X 25 FT	~~$9.880~~	~~$11.856~~	~~$13.832~~	~~$19.760~~
U HATH-022	PVC AIR HOSE 1/4 IN X 50 FT	~~$17.830~~	~~$21.396~~	~~$24.962~~	~~$35.660~~
U HATH-024	PVC AIR HOSE 1/4 IN X 100 FT	~~$31.705~~	~~$38.046~~	~~$44.387~~	~~$63.410~~
U HATH-041	PVC AIR HOSE 3/8 IN X 25 FT	~~$11.975~~	~~$14.370~~	~~$16.765~~	~~$23.950~~
U HATH-042	PVC AIR HOSE 3/8 IN X 50 FT	~~$20.735~~	~~$24.882~~	~~$29.029~~	~~$41.470~~
U HATH-044	PVC AIR HOSE 3/8 IN X 100 FT	~~$39.205~~	~~$47.046~~	~~$54.887~~	~~$78.410~~


U HCN-062G	RUBBER WATER HOSE 5/8 IN X 50 FT	~~$27.455~~	~~$32.946~~	~~$38.437~~	~~$54.910~~
U HCN-063G	RUBBER WATER HOSE 5/8 IN X 75 FT	~~$39.300~~	~~$47.160~~	~~$55.020~~	~~$78.600~~
U HCN-064G	RUBBER WATER HOSE 5/8 IN X 100 FT	~~$51.145~~	~~$61.374~~	~~$71.603~~	~~$102.290~~
U HCN-065	RUBBER WATER HOSE 5/8 IN X 300 FT	~~$142.500~~	~~$171.000~~	~~$199.500~~	~~$285.000~~

U HATH-052	PVC WATER HOSE 1/2 IN X 50 FT	~~$28.750~~	~~$34.500~~	~~$40.250~~	~~$57.500~~
U HCLW-062	PVC WATER HOSE 5/8 IN X 50 FT	~~$32.110~~	~~$38.532~~	~~$44.954~~	~~$64.220~~
U HCLW-072	PVC WATER HOSE 3/4 IN X 50 FT	~~$36.165~~	~~$43.398~~	~~$50.631~~	~~$72.330~~
U HCLW-1002	PVC WATER HOSE 1 IN X 50 FT	~~$62.090~~	~~$74.508~~	~~$86.926~~	~~$124.180~~
U HATH-053	PVC WATER HOSE 1/2 IN X 75 FT	~~$40.760~~	~~$48.912~~	~~$57.064~~	~~$81.520~~
U HCLW-063	PVC WATER HOSE 5/8 IN X 75 FT	~~$45.985~~	~~$55.182~~	~~$64.379~~	~~$91.970~~
U HCLW-073	PVC WATER HOSE 3/4 IN X 75 FT	~~$52.955~~	~~$63.546~~	~~$74.137~~	~~$105.910~~
U HCLW-1003	PVC WATER HOSE 1 IN X 75 FT	~~$88.305~~	~~$105.966~~	~~$123.627~~	~~$176.610~~
U HATH-054	PVC WATER HOSE 1/2 IN X 100 FT	~~$54.260~~	~~$65.112~~	~~$75.964~~	~~$108.520~~
U HCLW-064	PVC WATER HOSE 5/8 IN X 100 FT	~~$61.440~~	~~$73.728~~	~~$86.016~~	~~$122.880~~
U HCLW-074	PVC WATER HOSE 3/4 IN X 100 FT	~~$69.025~~	~~$82.830~~	~~$96.635~~	~~$138.050~~
U HCLW-1004	PVC WATER HOSE 1 IN X 100 FT	~~$115.240~~	~~$138.288~~	~~$161.336~~	~~$230.480~~

U HGN071	PVC GREEN GARDEN HOSE 3/4 IN X 25 FT	~~$27.045~~	~~$32.454~~	~~$37.863~~	~~$54.090~~
U HGN072	PVC GREEN GARDEN HOSE 3/4 IN X 50 FT	~~$49.380~~	~~$59.256~~	~~$69.132~~	~~$98.760~~
U HGN073	PVC GREEN GARDEN HOSE 3/4 IN X 75 FT	~~$71.720~~	~~$86.064~~	~~$100.408~~	~~$143.440~~
U HGN074	PVC GREEN GARDEN HOSE 3/4 IN X 100 FT	~~$94.055~~	~~$112.866~~	~~$131.677~~	~~$188.110~~
U HGN101	PVC GREEN GARDEN HOSE 1 IN X 25 FT	~~$41.260~~	~~$49.512~~	~~$57.764~~	~~$82.520~~
U HGN102	PVC GREEN GARDEN HOSE 1 IN X 50 FT	~~$72.765~~	~~$87.318~~	~~$101.871~~	~~$145.530~~
U HGN103	PVC GREEN GARDEN HOSE 1 IN X 75 FT	~~$104.220~~	~~$125.064~~	~~$145.908~~	~~$208.440~~
U HGN104	PVC GREEN GARDEN HOSE 1 IN X 100 FT	~~$135.655~~	~~$162.786~~	~~$189.917~~	~~$271.310~~

GB WSHDWN12-050FT	FDA WASHDOWN HOSE 3/4 IN X 50 FT				~~$158.910~~
GB WSHDWN12-050FT	FDA WASHDOWN HOSE 3/4 IN X 75 FT				~~$231.285~~
GB WSHDWN12-050FT	FDA WASHDOWN HOSE 3/4 IN X 100 FT				~~$317.820~~

U HJKC072	JACKHAMMER HOSE 3/4 IN X 50 FT	~~$45.290~~	~~$54.348~~	~~$63.406~~	~~$90.580~~

LEGEND: 1/4 IN TO 3/8 IN = NPT FITTINGS. 1/2 IN TO 5/8 IN = GHT FITTINGS. 1 IN = NPT/NPSM FITTINGS. DISCOUNTS: 3+ = 30% DISCOUNT. 6+ = 40% DISCOUNT. 9+ = 50% DISCOUNT. Updated: 2004 12 22.

SCRAP NO MORE

2004-10-01T00:00:00.000-07:00

We no longer offer HMS 1 SCRAP.

GSE HOSE

2004-07-09T01:06:00.000-07:00

GSE Hydraulic Hoses

09 July 2004—GSE EPDM HYDRAULIC HOSE. Aeroquip aircraft ground support equipment (GSE) hydraulic hoses are not for use on aircrafts. Designed for phosphate ester fluids—Skydrol LD4, Skydrol 500B, and Hyjet IVA Plus—used on GSE. Unlike conventional hydraulic hoses, these GSE EPDM hoses are made especially to resist these degrading effects of phosphate ester fluids. These are sold as assemblies (with fittings). Source: JA609, 1999. Click here.

2002-10-21T01:04:00.000-07:00

T-SHIRT

2002-10-21T01:01:00.000-07:00

SCOOTERS

2001-07-28T00:00:00.000-07:00

Scooters!

28 July 2001—We moved to 3700 San Fernando Road, Glendale, CA 91204. Phone: (818) 547-3010. Fax: (818) 547-3339.